Hjem       Aktuelt       Om oss       Tjenester       Våre selskap       Kontakt
Forsiden Kampanjer Datamaskiner
Hjem/Fritid
Kamera
Kommunikasjon
Komponenter
Lagring
Minne
Printing

HI-FI/STEREO

Du må logge inn for å handle/se priser.
VISION AV 1800 Stereo Amplifier 2 x 50w (AV-1800)
VISION AV 1800 Stereo Amplifier 2 x 50w (AV-1800)
VISION AV 1800 Stereo Amplifier 2 x 50w (AV-1800)
VISION AV 1800 Stereo Amplifier 2 x 50w (AV-1800)

VISION AV 1800 Stereo Amplifier 2 x 50w (AV-1800)

Type: Forsterker
På lager På lager: 144
Beskrivelse

Details

The improved AV-1800 is compact, and has a simple interface with just two dials which are turned to adjust and pushed to switch. It has a selection of inputs – including Bluetooth and a microphone input, making it suitable for meeting rooms, small auditoriums, lecture theatres, school halls, and small churches.

Bluetooth

The amplifier can automatically switch to the Bluetooth source when it is paired. Bluetooth can be renamed and the pin changed by connecting to a PC (see software link below)

Microphone Input

It uses a professional XLR connector and the input is “balanced” to eliminate electro-magnetic noise induced on long cables. The microphone input has “Phantom Power” – a voltage which is required by condenser-type microphones such as lectern microphones.

RS-232

It can be controlled by a control device such as Techconnect Control via IR or RS-232. It also comes with an IR remote control gives the user bass and treble adjustment and direct input selection.

3 x Stereo Inputs

Three stereo inputs accept input from a variety of sources such as computers (via the headphone jack), tablets or phones. 2 of the inputs are via 2-phono (RCA) connectors on the rear panel. Input 3 is via a 3.5mm Minijack connector, and is duplicated on the front and rear panels for easy access.

Line Output

A line-level pre-output on the rear panel bypasses the internal amplifier. It would connect to a larger amplifier or powered loudspeakers. It is post-mix, which means any volume adjustment made on the front panel affects the output level.

Auto-Standby

If the amplifier senses no input it will automatically go into standby mode. When it senses input it will reactivate. Auto-standby can be disabled.

Mounting Options

Optional mounting hardware is included to allow cable-tying either to a projector ceiling pole, or into a rack.

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.

Handlekurven

Tom handlekurv

Logg inn

Bruker:
  
Passord:
 
 Husk meg
Logg inn
Glemt passord?
Ny kunde?

Konfigurator

     Reservedeler

     Kabel-velger

     Velg riktig minne